Intruduction:
Energy and efficient straw pulp waste paper recycling drum type hydraulic pulper used for Carton corrugated paper mill pulping equipment has the characteristics of no damage to fibers, impurity crushing rate and low energy consumption. It can retain the strength of the fiber to a greater extent and completely remove the plastics and fabrics in the unselected raw materials, especially the wet-strength and viscose impurities that are harmful in the papermaking process.
Feature：
1. Although waste debris will block the screen holes, when the cylinder rotates, it will be washed back into the pulper by the washing water.
2. The speed of pulp passing through the sieve is very slow (less than 0.05m/s), thereby reducing the possibility of washing waste through the sieve into the slurry tank.
3. The pulp concentration is gradually reduced, so that the decomposing process continues until all fiber bundles are completely evacuated.
4. There is no need to consume energy for unnecessary stirring, cutting fibers and impurities, and the energy consumption is only consumed by the rotation of the cylinder, so each ton of pulp only consumes 15-20kw/h.
5. After all wastes that cannot pass through the sieve are discharged from the other end of the cylinder, no further fiber recycling is required.
6. The drum-type high-consistency pulper is very suitable for processing low-grade and difficult-to-handle waste paper such as household mixed waste paper, office waste paper without mechanical pulp and liquid packaging cardboard recycling. Waste paper can enter the pulp without sorting system use
Advantage:
●Single machine completes crushing and screening at one time
●The disintegration concentration reaches 14%-18%
●Does not damage the fiber
●Low impurity crushing rate
●Low power consumption
Parameter:
Model | ZGG-275 | ZGG-300 | ZGG-325 | ZGG-350 |
Equipment diameter（mm） | 2.75 | 3.00 | .025 | .05 |
Length（mm） | 16.3 | 17.6 | 21.8 | 23.2 |
Capacity（t/d） | 140-200 | 180-240 | 220-330 | 320-450 |
Power（kw） | 160 | 250 | 355 | 500 |
Working concentration（％） | 14-18 | 14-18 | 14-18 | 14-18 |
Pulp concentration（％） | 3-4 | 3-4 | 3-4 | 3-4 |
Operating temperature（°C） | 40-90 | 40-90 | 40-90 | 40-90 |
Detail photo:
In April 2020, it was learned from the Traffic Management Bureau of the Ministry of Public Security that the “One Helmet and One Belt” security guard operation will be carried out nationwide. During the operation, the public security traffic control department will strengthen law enforcement managem
In April 2020, it was learned from the Traffic Management Bureau of the Ministry of Public Security that the “One Helmet and One Belt” security guard operation will be carried out nationwide. During the operation, the public security traffic control department will strengthen law enforcement managem
Usually, the shell of the helmet is made of high-strength materials, such as metal, engineering plastics, Kevlar fiber, etc., through its deformation to absorb most of the impact; the lining material has the ability to absorb sweat, keep warm, and absorb shock. Military helmets often have the functi
