Paper Mill High-consistency Cleaner Papermaking Pulp Purification Equipment Cleaner OEM available desander from manufacturer utilizes the difference in specific gravity between the fibers and the impurities to separate the heavy impurities from the pulp to achieve the purpose of purifying the pulp. The equipment can be used in a wide range of applications, both for the rough cleaning of high-energy pulp and for the selective purification of low-concentration pulp before the paper machine.
Introduction:
The Paper Mill High-consistency Cleaner Papermaking Pulp Purification Equipment Cleaner OEM available desander from manufacturer can be used in the production of chemical pulp, semi-chemical pulp, and in the production of mechanical pulp waste pulp. It is widely used in the production of boxboard paper, corrugated paper, cultural paper, newsprint and toilet paper, especially for purifying waste paper pulp and semi-chemical method. The straw effect is better.
Feature:
A . Flexible structure design
Each slag remover is composed of inlet and outlet parts, wear-resistant cones, tailings discharge cones, etc., making it easier to disassemble and assemble.
B.Low power consumption
The unique structure design of Paper Mill High-consistency Cleaner Papermaking Pulp Purification Equipment Cleaner OEM available desander can make the slurry enter the slag remover at any concentration of 0.5%~2%, and the inlet pressure only needs 150Kpa, which can form a stable vortex, which greatly reduces the system power consumption and operation and maintenance costs.
C. Long service life
The main body of Paper Mill High-consistency Cleaner Papermaking Pulp Purification Equipment Cleaner OEM available desander is made of wear-resistant stainless steel, which enhances the wear-resistance and corrosion resistance of the slag remover, and has a wider application range; the slag discharge cone has a double-layer design and the inner layer is wear-resistant ceramics to ensure long service life.
Advantage:
1.Simple structure, small occupied area, large production capacity, convenient operation, no clogging of the slag discharge port, high purification efficiency;
2. Slurry passes through the slag remover only once, without the tail slurry processing equipment, and the fiber loss is zero.
3. The cone is wear-resistant, has a long service life, no transmission, no power is required to install it in the slurry conveying process, and the slag removal effect can be achieved.
Parameter:
Model | NHSG 31 | NHSG 33 | NHSG 35 | NHSG 37 | NHSG39 | NHSG 311 |
Capacityt/D | 10-30T | 43-100 | 100-180 | 160-230 | 260-400 | 450-600 |
Slurry concentration% | 0.8-6 | |||||
Feed pressureMPa | 0.15-0.35 | |||||
Slurry pressureMPa | 0.1-0.3 | |||||
Backwash water pressureMPa | input pulp pressure+0.2MPa | |||||
Diameter of input port mm | Φ150 | Φ200 | Φ225 | Φ275 | Φ325 | Φ375 |
Diameter of output port mm | Φ80 | Φ125 | Φ150 | Φ225 | Φ275 | Φ325 |
Processing capacitym3/min | 0.55-0.9 | 0.75-1.6 | 2.5-3 | 3.5-5.5 | 6.0-9.2 | 9.5-11 |
In April 2020, it was learned from the Traffic Management Bureau of the Ministry of Public Security that the “One Helmet and One Belt” security guard operation will be carried out nationwide. During the operation, the public security traffic control department will strengthen law enforcement managem
In April 2020, it was learned from the Traffic Management Bureau of the Ministry of Public Security that the “One Helmet and One Belt” security guard operation will be carried out nationwide. During the operation, the public security traffic control department will strengthen law enforcement managem
Usually, the shell of the helmet is made of high-strength materials, such as metal, engineering plastics, Kevlar fiber, etc., through its deformation to absorb most of the impact; the lining material has the ability to absorb sweat, keep warm, and absorb shock. Military helmets often have the functi